Portable Power Generators

Product Detail

1. Product Picture






2. Features

l 220V/50Hz pure sine wave AC output

l 5V/2A - 2 USB output ports

l LCD display

l Charged by PV & AC power

l LED with high lightness for emergency use

l Lithium battery built-in with long lifespan time: >1000 times recharge cycles

l Good high/Low temperature resistance: -20?~60?

l Real-time display: voltage, current, power, battery level etc.

l Automatically calculate the power of equipment and show battery time remaining

l Intelligent Indicator and Protection Functions

l Display of continuous usage time under different loads

 

3. Electronic Protections




NO.	Item	Parameter	Unit	Remark
1	Over battery voltage	>25.2/58.8	V	For 24V: 25.2V;   For 48V: 58.8V
2	Low battery voltage	<18/42	V	For 24V: 18V;     For 48V: 42V
3	Over temperature	=65	?	Lock, no output current until the temperature reduce
4	Over load	1200/2200	W	Lock, alarm, no output, load do not work (For 24V: 1200W; For 48V: 2200W)
5	Output short-circuit	— — —		Lock, no output, load disconnect
	For No.3/4/5, when in protective state, AC output need to be turned off. AC output will recover when restart.
6	Over-current (5V output)	>2.2	A	USB output port
7	Over-current (12V output)	>10	A
8	Over-current (24V output)	>20	A




4. Detail Function Introduction

 



NO.	Name	Function
?	USB-5V Output	To power 5V DC appliance, 1A output current for each USB port.
?	12V DC Output	To power 12V DC appliance, Max. output current 10A.
?	220V AC Output	To power AC appliance, 220V/50Hz pure sine wave, Max. Output power 1000W
?	LED Light	LED emergency light, used for light where there is no electricity or power off, the power of each light is 1W
?	DC Input	To charge the battery from AC grid via adaptor. The voltage of adaptor is 25.2V(24V)/58.8V(48V).
?	24V DC Output	To power 24V DC appliance, Max. output current 20A.
?	LCD Display	LCD display, when it is charged, the parameter flashes; when it is working, the display is normally backlit. DC parameter: DC voltage, DC current and battery time remaining. AC parameter: AC voltage, AC current, active power and balanced usage time for equipment.
?	AC Output Button	When press AC output button, 220V DC output start to work. Press it again when do not use it.
?	DC Output Button	When press DC output button, 5V/12V/24V DC output start to work. Press it again when do not use it.
?	LED Light Button	To control LED light
?	LED Light	LED emergency light, used for light where there is no electricity or power off, the power of each light is 1W
?	PV Input Port	Be connected to the PV panel, to charge the battery, the voltage of PV panel is 36V




5. Technical Specification

Model NO.	STD-M052426		STD-M102443		STD-M152466		STD-M204840
Continuous Output Power	500W		1000W		1500W		2000W
Peak Power	1000W		2000W		3000W		4000W
Battery Type	Lithium Battery
Battery Capacity	24V 26AH		24V 43AH		24V 66AH		48V 40AH
External DC Charging	DC25.2V/4A		DC25.2V/7A		DC25.2V/10A		DC58.8V/7A
Charging Time	6~7H		5~6H		6~7H		4~5H
Solar Charging                                    PWM
Max. PV Recommend Power	100W		180W		250W		470W
PV Charging Current	4A		7A		10A		8A
PV Input Volt.	36V						72V
Output
AC Output Voltage		220V/110V
Output Frequency		50Hz/60Hz
Output Wave		Pure Sine Wave
DC  Output		5V2A   12V10A    24V10A
Transfer Efficiency		=93% (DC?AC)
Others
Working Temp.		-15?~50?
Storage Temp.		RH45%~85%,Non-condensing
Protection Types		Over-current, Under-voltage, Overload, Overheat, Short circuit protection
Display		LCD
Display Content		DC Voltage, DC Current, Battery Remaining Capacity, AC Voltage, AC Current, Active Power, Remaining Time
Cooling		Cooling Fan
LED light		LED light 1W
Dimension		370*178*290mm (L*W*H)
Weight		5.2KG		7.8KG		10.2KG	12.8KG